ECU-11 / ECU-22
Relay Module for ECU-02 12V & 24V
The ECU-11 (12 VDC) and ECU-22 (24 VDC) Generator-Set Controller Relay Board is an optional add on accessory for the ECU-02. It isolates ECU-02 from electric shock and greatly shortens the set up and maintenance time.
Features
- Isolates ECU-02 From Electric Shock
- Provides Control Signals to Gen-set
- Simplify Genset Control Panel Assembly With Simple Harness* With Plug-In Connectors
- Euro Standard Terminals with DIN Rail Base
- Simple Maintenance
- External High Capacity Relay Applicable
<p class="anno"><span class="red">*</span>The available <a title="Harness for ECU-02 Connection" href="../generator-control-unit/ecu-40.html">harness</a> length range is from 26cm to 75cm.</p>
Dimensions
| Terminals | Function | |
|---|---|---|
| J1 , J2 | Terminal plugs which connect to ECU-02 by harness sets | |
| TB2 , TB3 | Terminal Strips which connect to Gen-set for control and sensing | |
| Fuse | Function | Specifications |
| F1-F3 | AC Input Voltage Protection | 20 mm , 2A / AC 250V |
| F4 | ECU-02 DC input Protection | 20 mm , 2A / AC 250V |
| F5 | Signal Output Protection | 30 mm , 50A / DC 30V |
| Relay | Function | Specification |
| K1 | Warm Up Signal | DC 30V / 5 Amp |
| K2 | Stop Signal | DC 30V / 30 Amp |
| K3 | Start Signal | DC 30V / 30 Amp |
| K4 | Auxiliary Signal | DC 30V / 5 Amp |
| K5 | Pre-heat Signal | DC 30V / 30 Amp |
| K6 | Alarm Signal | DC 30V / 5 Amp |
*Note : All features & specifications subject to change without notice.