Skip to main content

GCU-30

Manual Key Start Genset Control Unit

GCU-30 Manual Key Start Genset Control Unit has many useful functions and engine protections like the charge alternator failure protection. It's suitable for most available Rental market generators.

Manual

Features

  • Microprocessor Based Design
  • Universal LED Graphic Interface, Displays Generator Status and Failures
  • Modular Design, Quick Installation
  • Waterproof Front Panel With UV Protection
  • Charge Alternator Failure Protection
  • Two Push Button for Start and Pre-Heat
  • Three DIP Switches For Specification Setting
  • Suitable for Most Available Genset on The Rental Market

Specifications

Model NO. GCU-30
DC Supply 9.0 to 36 VDC
Rated AC Input Voltage 5~300 VAC
AC Frequency 50/60 Hz
Fuel Solenoid Signal Output 1.2 Amp @ 12/24 VDC
Start Signal Output 1.2 Amp @ 12/24 VDC
Preheat Signal Output 1.2 Amp @ 12/24 VDC
Charge Motor Excitation Signal Output 12/24 VDC
Power Consumption Under 3 watt
System Setting AC Frequency Setting → ON : 50 Hz , OFF : 60 Hz
Stop Mode → ON : Energized to Start , OFF : Energized to Stop
Engine Stop Timer Delay → ON : 20 sec. , OFF : 10 sec.
Protection & Alarm Status Indicators
  • High Water Temperature Protection
  • Low Oil Pressure Protection
  • Engine Over speed Protection
  • Charge Alternator Failure Protection
  • User Define Protection
Environment Operating Temperature : -20~70 °C
Storage Temperature : -40~85 °C
Relative Humidity : Maximum 90%
Panel Installation Cut-Out 66.0 x 66.0 ±0.5 mm
Dimensions 72.0 (L) x 72.0 (W) x 37.0 (H) mm
Weight 101 g ±2%

*Note : All features & specifications subject to change without notice.

Dimensions